What's the best temperature for a water heater?

Steffanie Scarfi asked, updated on January 3rd, 2022; Topic: water heater
👁 404 👍 17 ★★★★☆4.2

140 degrees F

Follow this link for full answer

Accordingly, is 140 degrees to hot for water heater?

The Occupational Safety & Health Administration (OSHA) recommends water heaters be set to at least 140 degrees Fahrenheit (60 degrees Celsius) to minimize the growth of Legionella and other microorganisms.

Having said that, what is the maximum temperature for a hot water heater? 120 degrees Fahrenheit

Along with it, is 150 degrees too hot for water heater?

The recommended setting for household water heaters is not 150 degrees, but slightly less _ 140 degrees. At that temperature, the water is hot enough to clean dishes and provide a steamy shower, but not so hot that it's dangerous.

Is 130 too hot for water heater?

Professionals recommend keeping your water heater set at a temperature between 130 and 140 degrees Fahrenheit. ... While turning the temperature up higher can result in burns, turning it lower than the recommended setting can also be dangerous. In colder water temperatures, bacteria can form in the water heater tank.

11 Related Questions Answered

Does 130 degree water kill bacteria?

The American Society of Sanitary Engineering recommends setting the temperature of home water heaters to 135 degrees to 140 degrees Fahrenheit, a range shown to destroy bacteria such as Legionella. At those temperatures, bacteria can neither thrive or survive to contaminate fixtures downstream from the heater.

Will turning up water heater make hot water last longer?

Turn up the thermostat on the hot water heater. One of the easiest ways to make a hot shower last longer is by using less hot water while it's at a higher temperature. To do this, turn up the temperature on the thermostat that's attached to the hot water heater tank.

Can 120 degree water burn you?

Most adults will suffer third-degree burns if exposed to 150 degree water for two seconds. Burns will also occur with a six-second exposure to 140 degree water or with a thirty second exposure to 130 degree water. Even if the temperature is 120 degrees, a five minute exposure could result in third-degree burns.

How often should I flush my hot water heater?

once per year

How hot is too hot for water heater?

When your water temperature seems exceptionally high, check the thermostat right away, before you pick up the phone to call a plumber. Although most water heater thermostats are set at 60 degrees Celsius (140 Fahrenheit) when first installed, the recommended setting is 49 degrees C (120 F).

How hot is too hot for tap water?

Water at 140 degrees can lead to a serious burn within three seconds, while it takes 10 minutes for water at 120 degrees to cause a serious burn, according to the researchers at the Johns Hopkins Bloomberg School of Public Health.

How do I make my hot water heater last longer?

3 Tips to Make Your Water Heater Last Longer and Work More Efficiently
  • Flush the water heater tank once a year. Almost all water heater manufacturers will recommend flushing the water heater tank annually. ...
  • Check the Anode Rod and Replace it if it's Badly Corroded. ...
  • Insulate the Hot Water Heater Tank.
  • Is 50 degrees hot enough for hot water?

    Water that is 57 degrees can cause a major burn within a few seconds. This highlights just how dangerous water can be over the 50 degree temperature mark even if it is only a few degrees. In the case of how hot is too hot, the absolute maximum should be 50 degrees for every appliance located in a bathroom area.

    What temperature is B setting on water heater?

    140°

    What is considered a safe water temperature for a bath?

    Ideally, experts say that the ideal water temperature for bathing and showering should be only one or two degrees above the body temperature of 98.6 degrees Fahrenheit. So a temperature range of 98 degrees to 100 degrees is best. There are dangers for the elderly when bathing in extremely hot or extremely cold water.

    How hot is 140 degrees Fahrenheit water?

    Estimated Times/Temperatures Causing a Full Thickness (3°) Burn in Adults/ChildrenWater TemperatureAdults (skin thickness of 2.5 mm)Children 0-5 Years (skin thickness of 0.56 mm)
    <160°F1 second
    <149°F2 seconds0.5 seconds
    <140°F5 seconds1 second
    135°F10 seconds4 seconds