1:24 means that a unit of measurement, such as one inch or one centimeter, on the model represents 24 units on the actual object. An example would be one inch of length on a model automobile would represent 24 inches on the real vehicle.
Follow this link for full answer
That being so, what size is a 1/18 scale car?
Most models are approximately 11 inches (280 mm) long by 5 inches (130 mm) wide by 4 inches (100 mm) tall, depending on what vehicle is being represented. Such detail is common to 1:18 scales and larger.
Over and above that, what size is a 1/32 scale model? 1:32 scale is a traditional scale for models and miniatures, in which one unit (such as an inch or a centimeter) on the model represents 32 units on the actual object. It is also known as "three-eighths scale", since 3⁄8 inch represents a foot.
That said, what are scale model sizes?
Popular scales are, in order of size, 1:144, 1:72 (the most numerous), 1:48, 1:32, 1:24, 1:16, 1:8 and 1:4. Some European models are available at more metric scales such as 1:50. The highest quality models are made from injection-molded plastic or cast resin.
What is the difference between 1 24 and 1 25 scale?
Registered. For display purposes, 1/24th and 1/25th scale are close enough for horseshoes, as they say. The difference in size is about 4 percent. You won't be able to swap engine or chassis parts between the two scales, though -- one won't fit with the other.
10 Related Questions Answered
RatioMillimetres per foot
1:18 scale is a traditional scale (ratio) for models and miniatures, in which 18 units (such as inches or centimeters) on the original is represented by one unit on the model. ... Many 1:18 scale automobiles are over 11 inches long, while 1:18 aircraft may reach over 3 feet in length.
1:64 scale is a traditional scale for models and miniatures, in which one unit (such as an inch or a centimeter) on the model represents 64 units on the actual object. It is also known as "three-sixteenths scale", since 3/16-inch represents a foot. A human is approximately 1 1⁄16 inches (27 mm) tall in 1:64 scale.
> No, 1:30 is a unitless ratio and means just what it says, 1 "anything" > equals 30 of the same "anythings" - so 1 inch = 30 inches, 1 mm = 30mm, etc. > > 1" = 30'-0" is the same as 1" = 360", or 1:360.
From front to back, the scales are: 1/144, 1/72, 1/48, 1/32, and 1/24. The smallest (1/144 scale) would be a little more than 2½" long; the biggest (1/24 scale), slightly more than 16".
To scale an object to a smaller size, you simply divide each dimension by the required scale factor. For example, if you would like to apply a scale factor of 1:6 and the length of the item is 60 cm, you simply divide 60 / 6 = 10 cm to get the new dimension.
A 1/10 will have better ground clearance, at least when comparing identical vehicle types, and not a 1/16 size truggy with a 1/10 scale onroad racer. 1/10 is also easier to work on, due to parts being bigger, less cramped together.
1:700 Scale, the collector's scale, offers the modeler hundreds of different model ship kits to choose from. This smaller scale translates to 1 Foot equals 700 Feet. Based on the example above, a 700' long ship would be a 12" model.