What does it mean when it says service StabiliTrak?

Hobert Wuori asked, updated on September 8th, 2021; Topic: service stabilitrak
👁 445 👍 22 ★★★★☆4.8

It just means that StabiliTrak is not currently able to initialize. This can be due to a variety of reasons including road conditions or improper tire size. If the message persists, then you should take your vehicle in for service.

Follow this link for full answer

Not to mention, what causes the StabiliTrak light to come on?

When this warning indicator light comes on in the dashboard, this could be an indication of several issues such as faulty wheel speed sensors, a faulty steering angle sensor, a faulty rotational speed sensor or a problem with the steering rack.

Thus, how do I turn off StabiliTrak? The traction control part of StabiliTrak® can be turned off by pressing and releasing the StabiliTrak® button if both systems (traction control and StabiliTrak®) were previously on. To disable both traction control and StabiliTrak®, press and hold the button for five seconds.

Different, can I drive my car with the StabiliTrak light on?

It is only safe to drive with the TCS light on if it appears when you are losing traction: it means the system is engaging. Driving without traction control can make your vehicle susceptible to spinning out and sliding around on the road. ... Driving with your TCS Light on can be dangerous.

How much does it cost to fix StabiliTrak?

The Best in Auto Repair The average cost for traction control switch replacement is between $80 and $90. Labor costs are estimated between $38 and $48 while parts are priced at $43. This range does not include taxes and fees, and does not factor in your unique location. Related repairs may also be needed.

10 Related Questions Answered

How do I fix my StabiliTrak on my Silverado?

Resetting StabiliTrak Gm recommends that you power down the vehicle for 15 seconds to give the StabiliTrak time to reboot. If it works after firing your Silverado back up, great!

What happens when StabiliTrak is off?

StabiliTrak is an electronic stability control system that uses a steering wheel position sensor to compare the position of the wheel to the vehicle's actual steering response. In the event that something is off, StabiliTrack will make small adjustments to the brake or engine torque to help a driver maintain control.

What does it mean when my Chevy Cruze says service StabiliTrak?

StabiliTrak is designed to help prevent accidents by giving you better control of your Cruze. If you have a service StabiliTrak warning, your Cruze will no longer be assisted when a loss in lateral traction is detected. StabiliTrak is a GM specific vehicle stability system.

How do you fix stability control?

On your dashboard, there is an ESC button that may have been pressed accidentally. If that's the case, you can manually turn the ESC light off. Start the car. Find the switch that says ESC, ESP, or DSC on the dash and press it for three seconds.

Should you always drive with traction control on?

Driving without traction control can make your vehicle susceptible to spinning out and you could possibly slide around on the road. It is best to keep your TCS in working condition and enabled in case hazardous weather pops up. This allows you to maintain control of your vehicle at all times.

Is StabiliTrak the same as traction control?

Traction control is any system that uses a sensor or series of sensors to tell the car when one wheel is slipping. ... GM's StabiliTrak is an ESC system that can apply the brakes to not only stop wheel slip but can actually alter the trajectory of the vehicle.

Why does my Chevy Cruze shake?

Fouled plugs can cause a misfire, which in turn causes an idle shake. Spark Plugs– One of the absolute most common causes (if not the most common reason that your Cruze may be shaking) is the spark plugs.

What does service traction control mean on a 2012 Chevy Cruze?

On a front-wheel-drive vehicle, the system operates if it senses that one or both of the front wheels are spinning or beginning to lose traction. ... When this happens, the system brakes the spinning wheel(s), and/or reduces engine power to limit wheel spin.

How do I turn off the StabiliTrak in my Chevy Cruze?

To turn off both traction control and StabiliTrak, press and hold the button. The Traction Control Off/StabiliTrak Off light will illuminate in the instrument cluster.

How do I reset my electronic stability control?

All you need to do is just start the car and find the switch. The switch may have the word “ESC”, “ESP” or “DSC”. Click and hold it for about 3 – 5 seconds and then check the dashboard again.