It goes on the audio header of your motherboard so you can get front panel sound.
In any event, do you have to plug in HD audio? Illustrious. No you only really need that for the front pannel audio jack on the PC case. Even then there are usually two and only one gets plugged in.
That being so, does HD audio go in AAFP?
Ans: AAFP/HD Audio is a pin header that is also labeled or marked on the motherboard as “AAFP.” This means “analog audio front panel,” and the cable is attached with this unit for providing the signals. With a new and upgraded motherboard and case, you'll need a former connector along with HD audio is standard.
The HD Audio cable goes in a header that's sometimes called AAFP, but can also be labelled as JAUD1. This is usually located on the bottom of your motherboard, often next to your USB2 headers, and you should be able to identify it by its shape and pin layout.
Option A: Connect the 3.5mm jack of your microphone to your case's front panel Mic-In jack, usually located either at the front or at the top (sometimes at the side) of your case. It has usually a microphone icon drawn above it. This jack will also be connected to your motherboard's 9-pin HD Audio header.
(4) (High Definition Audio) A specification for audio and modem circuits on a PC motherboard. Introduced in 2004 by Intel and superseding AC'97, HD Audio provides eight channels (7.1) of 32-bit, 192 kHz audio for Dolby Digital and DTS surround sound.
HD audio, or high-definition audio, enables streaming music to sound more like an original studio recording. While the specifications for HD audio can vary, the term is generally used to refer to digital music formats that offer at least CD-quality mastering.
The American Academy of Family Physicians (AAFP) represents more than 124,900 physicians and medical students nationwide. The AAFP was founded in 1947 to promote the interests of family physicians and their patients.
The Front Panel Connectors, also known as the Front Panel Header or FPanel, is a block of connectors on a motherboard that control the power on, power reset, beep code speaker and the LED light indicators on your PC case/chassis. ... The cables that connect to the motherboard come from the PC case.
Line in is the audio jack found on an audio device that can be used to connect to another audio output device or microphone. ... The core functionality of the line-in jack is to aid in audio recording or manipulate the incoming audio. Line in is also known as sound in, audio in or mic in.
Locate the connector for the PC speaker near the front of the case. Generally, the connector has two wires -- black and red -- and a black connector with four holes on the end. Examine the black connector, and note the hole a dot or arrow next to it. This end of the connector should align with pin 1 on the motherboard.