Edgardo Khansari asked, updated on July 13th, 2021; Topic:
wood turning
👁 432👍 17★★★★☆4.4
##Studies have shown that spalted wood is actually no more dangerous to woodworkers or those who have the wood in their homes than any other wood pieces. ... There have been cases of people having allergic reactions to the inactive fungus spores contained within spalted wood.
Spalting is caused by certain white-rot decay fungi growing in wood–primarily hardwoods such as maple, birch, and beech. The fungi create —zone lines“ in the wood where territories of competing fungi meet. ... If these decay fungi are allowed to grow for too long, however, the strength of the wood is diminished.
Else, how do you get Spalted wood?
Just, is Spalted wood expensive?
We sell a lot of ambrosia for tabletops and countertops. But anything with a natural edge right now is moving for us, anything with character.” Retail prices for 4/4 spalted maple were quoted at $7.50 to $9/bf, though price is often dictated by the amount of figure.
How do you stop Wood from spalting?
I would cut slabs and sticker them for drying. Moisture in the wood will let the spalting continue. As soon as it starts to dry, the spalting stops.
Spalting is any form of wood coloration caused by fungi. Although primarily found in dead trees, spalting can also occur in living trees under stress. Although spalting can cause weight loss and strength loss in the wood, the unique coloration and patterns of spalted wood are sought by woodworkers.
Notes on Spalting Wood. The spalting process usually takes several weeks. Begin checking after six weeks. If you like the coloration, remove the wood from your bag or container. If not, allow the wood to spalt for another two weeks and then check again.
Bird's eye maple is most often found in Acer saccharum (sugar maple), but millers also find bird's eye figure in red maple, white ash, Cuban mahogany, American beech, black walnut, and yellow birch.
Ambrosia Maple is a general term attached to a variety of Acer (true maple) species whose boards included colorful bug “trails” — caused by a fungus carried by the Ambrosia Beetle which penetrates the tree sap as the beetle eats into the tree, and it spreads both through the worm hole and up and down in the tree ( ...
Like most maple, spalted maple is used as a veneer and typically paired with a mahogany body. It's unique appearance is due to fungus that invades the wood and creates distinct black striping called zone lines. These lines are built up by the fungus as a way to delineate itself from the rest of the wood or other fungi.
A burl results from a tree undergoing some form of stress. It may be caused by an injury, virus or fungus. ... Almost all burl wood is covered by bark, even if it is underground. Insect infestation and certain types of mold infestation are the most common causes of this condition.
Spalting is a process caused by fungi that changes the grain and color in wood. Wood that has been spalted will look different from other wood from the same species.
Spalted maple comes from the wood essentially rotting. Fungi grow on dead trees and change the color. Ambrosia maple is caused by beetles that eat their way into the wood, bringing fungus in which changes it. Typically it's striped rather than the crackling effect like spalting.
Microwaving wood is a great way of drying timber quickly with very little fuss. Many people have experimented with the concept to great success. A microwave can bring the drying time of rough-turned pieces down to around one week, without the risk of the wood degrading.
Woods like spalted Maple are chosen specifically for their colors and patterns so staining these pieces of wood is not a typical thing. But they are wood and will accept stain like most any other wood.....