Paulene Nowzari asked, updated on March 12th, 2022; Topic:
chain link fence
๐ 500๐ 71โ โ โ โ โ4.3
Installing a chain link fence is a project that takes a little bit of skill and some hard work. Following these instructions will help you install a chain link fence. Plan the fence. Set up your fence inside your property lines, and decide where it will sit and how big it will be [source: Lowes].
Further, how far apart should posts be on a chain link fence?
As chain link fence posts are smaller and sturdier than many other types, the holes should be smaller and can be farther apart. Follow the fence manufacturer's instructions for spacing, which typically ranges from 4-10' apartโspacing should not exceed 10' on-center. (fig.
Though, how do I make my own chain link fence? Chain Link Fence Posts
Step 1: Prep the Project "
Step 2: Gather Materials "
Step 3: Layout the Fence "
Step 4: Prepare Post Holes "
Step 5: Set Posts "
Step 6: Attach Tension Bands and Gate Hardware "
Step 7: Install Caps & Rails "
Step 8: Unroll the Fence Fabric and Install a Tension Bar "
And, how much does it cost to fence 1 acre with chain link?
If for example, a 4' high residential chain link fence costs $4.56 per linear foot, then your rough cost on the one acre would be $3,812.16 in materials ($4.56 x 836 linear feet), the 10 acres would be $12,038.40 ($4.56 x 2,640 linear feet), and if you are estimate the cost for a quarter of an acre, it would cost ...
Do you have to use concrete for chain link fence posts?
Securing your fence posts with concrete makes your fence more stable and reliable. Anchoring your chain link fence posts with concrete is a sure way to make sure your fence stands strong for years to come.
Install tension wire on the bottom of the fence line. This wire reinforces the bottom of a chain link fence and helps prevent the bottom from 'pulling' up if an animal tries to push the fabric out and away from the fence line.
Divide the total number of feet of fencing by 10 and subtract one. Add one for each corner post that will be used to find the total number of line posts needed for the project. These are smaller diameter posts used to support the fence along the length of each section and should be spaced a maximum of 10 feet apart.
A 40-pound bag of concrete mix makes 0.3 cubic feet, 60-pound bags make 0.45 cubic feet and 80-pound bags make 0.6 cubic feet. For the example given, 56 of the 40-pound bags, 37 of the 60-pound bags or 28 of the 80-pound bags will be needed for the fence installation.
If you decide to install your chain link fence without concrete, use a post-hole digger to make a hole deep enough to bury the posts at least two feet, or about 1/3rd of the height. Never pound the posts into the ground, especially if you have hard clay or rocky soil, because you'll bend the tops.
Treated pine tends to be the most affordable, and also durable wood option. Cedar tends to be a pricier wood for fencing, and redwood and teak at the top end. Vinyl, wrought iron, brick or stone fences are the most expensive.
However, not every fence will greatly increase your home's value. For example, a chain link fence, a style of fence that's considered less aesthetically pleasing, is a less costly option when installing the fence but it won't increase the resale value as much.
The minimum depth that you should dig your fence post holes for panel sections is 2 feet. A general formula is to dig the holes one-third to one-half of the post's aboveground height. The deeper you dig the holes, the more stability your fence has, but you must also purchase longer posts.
Fence posts should be on the outside of the fence The correct installation of ag fencing is to place it on the inside of the posts. This way, animals in the enclosure brush against the wire, not the posts. Fence posts that have been placed outside of the fence material will take nearly all of the animal's force.
Obtain 1/2" diameter wooden dowels to use as stakes.
Cut them into pieces 12-18in long.
Wrap one end in duct tape to prevent splitting during burial.
Positioning each stake 1-2ft from posts and each other, insert them down through the chain link so that they prevent the bottom of the fence from moving in or out.
Contrary to what many people think, making a chain link fence electrified does not involve directly electrifying the chain link itself, since it is not insulated. The correct way to electrify a chain link fence involves the addition of an off-set electric wire that gives an animal a slight โshockโ when it touches it.