How much tile is needed for a standard shower?

Clifford Goeckel asked, updated on November 13th, 2021; Topic: how to tile
πŸ‘ 348 πŸ‘ 16 β˜…β˜…β˜…β˜…β˜†4.3
//"> he standard dimensions for a tub-shower combo are 60 inches in length, 32 inches in width and 8 feet in height. Tile β€” Your tile selection has the biggest influence on the look of the shower. You will need 90-95 square feet of wall tile and 15-20 square feet of shower floor tile.

Follow this link for full answer

In a general, how much tile do I need calculator?

Multiply the tile length by the width to figure the area that one tile will cover in square inches. Divide the result by 144 to convert it to square feet. Then, divide the area you're tiling by the square footage of one tile to determine how many tiles you need. Again, round up to the nearest whole number.

Still, how much does it cost to do a tiled walk in shower? A tiled walk-in shower costs $2,500 to $5,000. Some contractors may charge more than$10,000 depending on the tile.

Besides, what do I need to put tile in my shower?


  • Tile.
  • Grout.
  • Grout Float.
  • Haze Remover.
  • Grout Sealant.
  • Drop Cloths/Plastic Sheeting.
  • Thinset.
  • Backer Board.
  • What is the minimum size of a walk in shower?

    36 inches by 36 inches

    12 Related Questions Answered

    How do you calculate bathroom tiles?

    Here are seven steps to measuring your tile area: Multiply the height and width of each section. Add together all the sections and divide that number by 144 for the square footage. Subtract windows or benches from the total as appropriate. Add 10% overage, or 20% for our Moroccan Fish Scales (multiply by 1.1 or 1.2).

    How many square feet does a 16x16 tile cover?

    1.77 sq

    How many square feet does an 18x18 tile cover?

    For example, if you wanted to use 18 X 18 inch tile pieces, which equals 2.25 ft, and the total square footage of your room is 300sq ft, then you would divide 300 by 2.25, which would equal 133.3 pieces.

    What is the standard size of a tile?

    Standard floor tile sizes range from just two inches wide to a foot and a half. Now, the more common and fashionable sizes include 12”×12”, 18”×18”, 12”×24”, and even larger dimensions for floor tiles, and 8”×10” and bigger for wall tiles.

    Are walk in showers a good idea?

    A walk-in shower increases your home's value, especially if you are conscious of the accessibility issue. It also is easier to clean and can be used in every decor style, from the soft traditional to rough industrial.

    How much does it cost to put in a walk in shower?

    However, most of the time, conversion from a tub to a walk in shower is motivated by the lack of enough space and the urge to make the bathroom more sophisticated. Typically, the installation cost of a walk-in shower goes between $2500 and $15000.

    Is it cheaper to tile a shower or buy a surround?

    Because they are less laborious to install, surrounds are often less expensive than tile. Some high-end materials, however, such as granite, may be more expensive than tiling with some grades of tile.

    How do you waterproof a shower floor before tiling?

    Should tile be at the top or bottom of a shower wall?

    Measure Twice, Cut Once Both ends of the first course need cut pieces. Because shower walls are frequently out of plumb, I always measure cuts at both the bottom [6A] and the top [6B]. With -inch grout lines, I will cut the tile ΒΌ inch shorter than the measurement.

    What is the best material to use for shower walls?


    What is the average walk in shower size?

    1700mm by 700mm

    What is a good shower size?

    As for size, your shower should be at least three feet square and have a wide entry, so there's ample room to get in and move around. Designer Mary Jo Peterson, CKD, CBD and a universal design specialist in Brookfield, Conn., says 42 by 60 inches is even better, particularly for showers that have no door or curtain.