70mm, 2.75 inch, Stage Ball (100 grams) The 70mm ball is just a bit smaller than a baseball (hard 73mm) and it a nice size for adults doing 3-5 balls, and are over 5.5 feet tall.
Follow this link for full answer
Thus, what size is 35mm in inches?
Millimeters to Inches table
Even in the case, what size is 110mm?
millimeterdecimal inchclosest fractional inch
|100mm||3.94"||4" (the diameter of a soft ball avg's 3.5-3.8" unless you're in Chicago)|
|1000mm (1 meter)||39.37||39-3/8"|
Short, what size is 35mm in standard?
Metric / Standard Wrench Conversion Chart
How thick is 60 mils in inches?
Visit our page for our plastic broken down by thickness.
|30||0.762||0.03 1/32 in.|
|60||1.524||0.06 1/16 in|
12 Related Questions Answered
This thickness is indicated as MIL (thousandth of an inch). 1 MIL is a measurement unit that equals 0.001 inch which is about the width of an average human hair. Generally speaking, higher MIL designation equates to a thicker and strong plastic sheathing....Understanding Thickness of Plastic Sheeting.
|6 MIL||0.006 inch|
|9 MIL||0.009 inch|
Measure the length of the foot from heel to tip of the big toe, in millimeters. Measure of the width of the foot across the widest part of the foot, in millimeters.
Ring Size Conversion Chart
Ring Diameter (MM)USA/CanadaJapan
|Diameter||0.750 in. 19.05 mm||0.705 in. 17.91 mm|
|Thickness||1.52 mm||1.35 mm|
|No. of Reeds||N/A||118|
Wrench Size And Conversion Table
|1.200||11/16 Wworth; 3/4 BSF|
|1.250||1 1/4 AF|
Standard / Metric Wrench Conversion Chart
SAE to Metric Conversion Chart
Do you find this helpful? I would choose the 1mm. It is a little bigger than the 0.8mm. Hope this helps.
1 inch = 25.4mm.
Mil is a US engineering term for 1/1000th of an inch (from French mille for one thousand). Thus, 9 mil paper is 0.009 inch or about 0.23 mm thick. Doesn't sound like much, but newspaper and typing paper run about 2.5-3.5 mils. Photo paper used in 1-hour labs is about 8.5 mils thick.
A millimeter is about the thickness of a plastic id card (or credit card). Or about the thickness of 10 sheets of paper on top of each other. This is a very small measurement!
A "mil" A mil is a measurement that equals one-thousandth of an inch, or 0.001 inch. Most human hair is one-thousandth of inch, or 0.001 inch. 10 mil plastic sheeting is therefore thicker than 6 mil. 5 mil is thicker than 3 mil.