How do you reset the oil maintenance light on a 2010 Toyota Prius?
Margene Sadri asked, updated on December 6th, 2022; Topic:
toyota prius
👁 416👍 13★★★★☆4.9
Turn car off. Press and hold km/h MPH selector button. While continuing to hold this button, step on the brake and press the power button. At this point, the display will say it's resetting the oil life.
Turn the vehicle completely off. Press and hold the “Trip” button. Continue to hold the “Trip” button while turning the ignition to “On” without starting the engine. Release the button when the trip meter is set to all zeros.
Other than that, how do you reset the oil maintenance light on a 2011 Toyota Prius?
Anywho, how do you reset the oil light on a 2009 Toyota Prius?
How do you reset the oil maintenance light on a 2010 Toyota Highlander?
To reset the oil life on a 2012 toyota prius you will need to hold the odometer reset button while the car is off and hold it down while you turn the vehicle back to the on position.
Press and hold the “Trip” stem button on the odometer. Continue to hold the “Trip” button while switching the ignition to “On” without starting the engine. For push button ignition models, press the button once. Release the “Trip” button when the trip meter is set to all zeros, and you're done.
The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It's a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop. Changing the oil in your Toyota can improve fuel efficiency and make your vehicle run as smooth as silk.
The Toyota handbook that came with your Corolla can give you a recommended oil change schedule, which is about every 6 months or 5,000 miles. That being said, many drivers opt to change their oil more frequently, instead bringing them in every 3 months or 3,000 miles.
Most often this just means your vehicle might be due for an oil change. The light will come on and remain on if the distance driven exceeds 5,000 miles after the maintenance data has been reset.
If your oil light stays on even after changing your engine oil, you're going to want to check the sensor first to rule out a malfunctioning sensor as the cause. Dirt and other particles can make their way into the oil pump, causing the sensor to falsely identify oil issues. ... The next common cause is low oil pressure.
If you are using a Prius as a plug in hybrid with reasonable care the engine should outlast the rest of the car. Don't change the oil like you should and it likely won't last more than 40 or 50,000 miles.
The engine's oil capacity is about 4.4 US quarts, and it requires an oil viscosity of 0W-20. To change your Toyota Prius oil, expect the repair to take from 25 to 35 minutes, assuming your vehicle is already raised and the required tools and parts are ready.
To reset the oil maintenance light press the display until it reads the odometer reading, turn the power switch off, press the power switch to ignition on while holding down the trip meter reset button, keep the trip reset button held down for about 10 seconds , the display will read 000000 and then the light will go ...
To reset the oil light in a 2008 toyota highlander, turn the key to the on position without starting the vehicle. Press the trip button until you get to trip a. And turn the key off. Once, it's off, press and hold that reset button while turning the key back to the on position.