How do you refinish a stained coffee table?

Paulette Macomb asked, updated on August 29th, 2021; Topic: refinish
👁 496 👍 15 ★★★★☆4.3

To refinish a coffee table, start by sanding off the old finish. Clean up all the wood dust from sanding so the bare wood surface is clean and ready for a new finish. After that, apply a new finish like furniture oil, wood stain, varnish, or paint that will give the coffee table the final look you want.

Follow this link for full answer

Anyways, do you have to remove old stain before restaining furniture?

Laquer. You don't need to remove all of the old stain to apply darker stain. But you do need to remove all of the lacquer, varnish or anything that will prevent new stain from absorbing into the wood. ... Your sanding block will initially glide over the old lacquer before it begins to cut into it and remove it.

In addition to that, can you stain over stained furniture? Staining over stain is easy and works beautifully if your applying a dark stain over a lighter stain on raw wood. 2. You can mix 2 or more stains together to make DIY custom stains.

Either way, can you Restain a table without sanding?

You absolutely do not need to sand the finish off the table, just lightly sand enough to rough up the existing finish to give the Polyshades something to grip. No need to break a sweat for this step. After the sanding is done, wipe the table down with a damp cloth to remove any dust.

What's the best finish for a coffee table?

Go with Polyurethane There are lots of clear finishes. But for a combination of usability and durability, you can't beat polyurethane. Oil-based poly, which dries slower than water-based, is best for beginners because it allows more working time.

14 Related Questions Answered

How do you restore wood without sanding?

What happens if you don't sand before staining?

A lot of folks make the mistake of sanding to either too fine of a grit or not fine enough before applying stain. Too fine and the wood won't be able to accept the stain. Too rough and the wood will be very dark almost to the point of being black.

Will vinegar remove wood stain?

Pour vinegar on the stain and brush it with a stiff brush. Let the vinegar work for several minutes, then rinse off and let the wood dry. If the stain is still visible, it can sometimes be removed by bleaching with oxalic acid, sold at some paint stores and home centers.

Is it better to sand or strip furniture?

Stripping is Faster and Often Safer. It's almost always better to strip than to sand. ... To begin with, except in cases where the old finish is flaking off, it's a lot more work to sand than to strip using a paint-and-varnish remover.

How much should you sand before staining?

Sanding tutorial ( for those that want to know more)DescriptionGrit #Use
Fine Medium Fine180Finish sanding before staining
Medium100Removing rough texture

How do you refinish stained furniture?

  • Clean. Any refinishing furniture DIY starts with basic cleaning. ...
  • Examine. Take an overall assessment of the piece and determine if it needs any repairs. ...
  • Remove the Old Finish. ...
  • Sanding. ...
  • Chemical Stripper. ...
  • Seal the Wood. ...
  • Stain or Paint. ...
  • Apply Finish.
  • How do you Restain a wood table?

    What is the fastest way to sand furniture?

    What can I use to strip a table?

    How do you seal a wooden coffee table?

    There are three surefire ways to waterproof your wood for years to come.
  • Use linseed or Tung oil to create a beautiful and protective hand-rubbed finish.
  • Seal the wood with coating of polyurethane, varnish, or lacquer.
  • Finish and waterproof wood simultaneously with a stain-sealant combo.
  • What finish is best for a dining table?

    Varnish and oil-based poly finishes are the most durable. Tung oil and linseed oil are relatively durable. In general, it's best to stay away from shellac. Lacquer can be tough, but it tends to take on a yellow color as time goes by.

    How many coats of polyurethane do you need for a coffee table?

    two coats

    How do you make wood baseboards look new?

    Make your wooden furniture pieces, stairway spindles, banisters, doors, baseboards and window frames look brand new by applying a fresh coat of paint or stain over the existing lackluster surfaces. Use sandpaper to lightly roughen shiny paint or stained wood to create a better bonding surface for paint to adhere.

    How do you recondition old wood?

    How To Revive Old Wood
  • Sand Lightly. Using something like 120-grit sandpaper make sure there isn't any dirt or loose wood fibers lingering. ...
  • Apply Oil. Mix up a 50/50 solution of boiled linseed oil and turpentine. ...
  • Prime & Paint. Using a good oil-based primer, cover the bare wood after the oil is cured.