If your kids are keen on having their own slide at home but, you are worried about the cost, you can always look into building your own. ... There are lots of different types of slides in this guide, from simple indoor builds to complex outdoor constructions and some fun water slides.
Go to Slide Show > Custom Slide Show, and then select Custom Shows. In the Custom Shows dialog box, select New. Under Slides in presentation, click the slides that you want to include in the main custom show, and then click Add.
The culvert's cross-section area should be at least 1.25 times the cross-section area of the stream, if the culvert is for a shallow ditch or seasonal stream. ... In the three examples above, the culvert cross-section areas would be: 3.5 x 1.25 = 4.375; 3.5 x 1.75 = 6.125; or 3.5 x 3 = 10.5.
Snap-Tite's Large Diameter high density polyethylene (HDPE) Lining System is the ideal solution for failing metal and concrete culverts of any size, including oval or arched. ... Also, HDPE is of the most corrosion- and abrasion-resistant pipe materials available.
Polyethylene (PE) is a thermoplastic material produced from the polymerization of ethylene. PE plastic pipe is manufactured by extrusion in sizes ranging from ½" to 63". PE is available in rolled coils of various lengths or in straight lengths up to 40 feet.
A standard plastic culvert pipe will hold a maximum weight of 40,000 lbs according to reports. Considering that the average car weighs around 4,000 lbs, that means roughly 12 cars can fit within one standard plastic culvert pipe.
For making surfaces slick there are two excellent options–one temporary and one permanent. The temporary solution is to apply something to the surface, like wax. There are also sprays available made with different compounds, but I recommend good old Johnson's Paste Wax.
If the surface is too slick and oily then wash it with water and liquid dish soap using a rag or sponge. This should remove any excess oils or lubricants that are making the slide so slick. If the angle is too steep consider putting a tire or pile dirt under the slide to lessen the angle.
According to the CPSC Playground Safety Handbook and ASTM F1487-11, an embankment slide should be designed to an average angle of 30 degrees and it must not exceed 50 degrees at any point. The material of the slide is also something important to keep in mind.
The PowerScape Roller Slide is a fun, inclusive play activity for children of all abilities. For children with sensory processing issues, the Roller Slide provides a calming sensory experience and can be incorporated into an occupational therapy protocol. ...
Plastic, metals, fiberglass, and wood (usually covered in a slippery plastic sheet) are commonly used to make commercial and residential playground slides. Other materials used for constructing a slide -most commonly a DIY slide- are PVC pipes, plastic culverts or large drain piping, and sheet metal.