Regardless, how do I remove a fluorescent light cover?
Besides, how do you remove the acrylic cover on a fluorescent light fixture? Removing an Acrylic Cover To remove an acrylic cover from a fluorescent light fixture, push up on one of the short ends of the cover while supporting the other short end with your other hand. As you push up on one short end, angle that end of the cover up into the light fixture a little bit.
Still further, how do you remove fluorescent light covers without clips?
Wrap your fingers under the edge of the light cover if there are no clips or tabs. Pull outward and down. A lip on the inside of the cover may hold it in place. Set the cover gently on the ground or a work table so that it does not get scratched.
Locate the wiring cover plate, usually in the center of the fixture. On either side of the cover, there will be tabs that catch in slots in the fixture. Squeeze the sides of the cover inward to slip the tabs out of the slots, and pull the cover down. This will expose the ballast and its wiring.
Access the plastic ceiling light, using a stepladder. Remove the plastic light shade by twisting it counterclockwise. Alternatively, loosen the fitter screws around the light base to remove the shade.
You can get a new ballast at a hardware store or home center and install it in about 10 minutes. However, buying a ballast can be expensive, so consider pricing a brand-new fixture for comparison.
2.Look for warning signs that the ballast is failing.
Buzzing. If you hear a strange sound coming from your bulbs or light fixture, like a buzzing or humming noise, that's often a sign your ballast is going. ...
Repairs you can do yourself If you are competent with DIY works around the house you can perform the following electrical projects: Replace a simple light fitting. Replace light switches. ... Repair loose wiring in plugs, switches, or light fittings.