Knock them over.Pin their shoulders with your knees so you have both hands free.Force the phone into their hand. You may need to break a couple of fingers.Use one of the broken fingers to press the answer button (assuming it has one). Ignore the screams.Mash the phone handset to the side of their face.
Follow this link for full answer
From everywhere, how do I force a call through a busy line?
Call the Operator. Dial "0" for the operator. When you get one on the line, tell him that you have been attempting to reach a number, but it is busy. Request that they perform an emergency breakthrough or a busy line interrupt.
Really, does * 66 still work? *69 Call Return. *77 Activate Anonymous Call Rejection. *60 Activate Call Blocking. *72 Activate Call Forwarding....
FeatureActivateDeactivate
| Busy Redial | *66 | *86 |
| Call Block | *60 | *80 |
| Call Forwarding | *72 | *73 |
| Call Forwarding Busy Line | *90 | *91 |
Lastly, how do you make a phone number busy?
On the Android mobile client, tap Busy settings and, then, Send incoming calls to....Configuring busy settings
Default routing. New incoming calls will continue default routing.Busy signal. New incoming calls will get a busy signal.Alternative number. ... Voicemail.
How do you contact someone with Do Not Disturb on?
Call Once and Call Again Within 3 minutes. The default Do Not Disturb Mode setting allows Calls to go through if someone Calls Again from the same Phone Number within three minutes of the first Call. ... Call At A Different Time. ... Call From A Different Number.
8 Related Questions Answered
When you call someone who does not have Do Not Disturb mode active, you will hear a beep and then leave the voicemail. The person you are calling will not have a mobile ring or will be disturbed by a notification which makes sound or illumines the screen.
In North America as well as some other areas, the *67 code, which is a service code blocks the number display for the call that is being made. It's sometimes referred to as caller ID block. This does not block the ID of the number from 911 or toll free calls.
When the line's no longer busy, you'll hear a distinctive (short-short-long) ring. You can: Ignore the ring, or. Pick up the phone to connect the call....Next time you get a busy signal, do the following:
Hang up the phone.Lift the receiver and listen for the dial tone.Press *66.Hang up the phone.
Actually, it's more like *67 (star 67) and it's free. Dial that code before the phone number, and it will temporarily deactivate caller ID. On the receiving end, caller ID will usually display “private number” because it has been blocked.
It's called "continuous redial," and simply entering a code (*66) after a busy signal will tell the line to keep redialing each time a call fails. A simple three-presses of *86 then stops continuous redial.
This trick is very simple. Just remove your battery from your smartphone without switching off the smartphone. By doing this, you will be unreachable, until you turn on your smartphone.
Reasons for a busy signal The called number is talking with another caller on the phone. The number is calling out. Someone else has called the number or is calling the number at the same time. The other line was left off-hook.
You can easily check if a number is busy or not by using Truecaller App. All you have to do is to go on Truecaller check your call log. If the number is busy it would show a red dot, as well it would mention if the person is on call or the last time he\she checked Truecaller.