How do I factory reset my AirPods pro?

Jack Januszewski asked, updated on May 4th, 2022; Topic: how to reset airpods pro
👁 426 👍 12 ★★★★☆4.2

How to Factory Reset Apple AirPods

  • Press and hold the setup button for at least 15 seconds.
  • Hold the button until the status light starts flashing amber a few times and then flashes white.
  • You AirPods have now been fully reset. You will need to re-pair your AirPods to your devices in order to use them again.
  • Follow this link for full answer

    In all cases, why are my AirPods Pro not resetting?

    Try pressing the AirPods down gently to the charging case and then try resetting it. If, however, you still find the AirPods won't reset, then try to remove the AirPods from the case and put it back. ... We've found that after charging the AirPods after some time, the AirPods were able to be reset.

    Eventually, why is AirPod Pro not working? The simplest and most likely explanation for one AirPod not working is its battery is dead. AirPods can drain batteries at different rates, so even if the AirPods charged simultaneously, one might run out of juice first. Check AirPods battery life or your battery widget and charge if you need to. Clean the AirPods.

    is it true, can you track AirPods if they were reset?

    Once AirPods have been reset it's impossible to track them. ... If the AirPods were lost or stolen recently, there's still a chance that you could track their location and potentially retrieve them.

    What do I do if my AirPod Pro won't connect?

    If you're having trouble getting your AirPods to connect, make sure your AirPods are charged, Bluetooth is turned on for the device you want to connect, and reset the device before trying again. If none of those steps work, you should un pair your AirPods from your device, reset the AirPods, and try to reconnect them.

    12 Related Questions Answered

    What does blinking amber light mean on AirPods?

    When your AirPods aren't in your case, the light shows the status of your case. Green means fully charged, and amber means less than one full charge remains. ... If the light flashes amber, you might need to set up your AirPods again.

    Why isn't the white light on my AirPods flashing?

    If you see no light: Your AirPods and their case are dead and need to be charged. ... If you see a green light while your AirPods are connected to a charger: Your AirPods are fully charged. If you see a white flashing light: Your AirPods have been reset and are ready to connect to your iPhone, iPad, Mac, or other device.

    Why is my right AirPod Pro not charging?

    I had the same issue, and a simple solution fixed the problem for me. I wiped off the metal end of the right AirPod, and then used a Q-tip to clean the bottom of the case where the metal end of the right AirPod made contact with the case. Works great once again and holds charge. Hope this helps!

    How do I reconnect my AirPods?

    Press and hold the setup button on the charging case for up to 10 seconds. The status light should flash white, which means your AirPods are ready to connect. Hold the charging case – with your AirPods inside and the lid open – next to your Mac. Follow the steps on the screen of your Mac.

    Can AirPods Pro be tracked?

    If your AirPods, AirPods Pro, or AirPods Max are offline You can see AirPods Max in Find My for up to 18 hours inside their Smart Case. ... Find My is the only way that you can track or locate a lost or missing device. There is no other Apple service that can find, track, or otherwise flag your device for you.

    Where is the reset button on AirPods?

    So, that small button on the back of the AirPods' charging case is the key to resetting the AirPods. Hold it down for 15 seconds and the LED light on the case will change from white to amber. You can't hold it down for too long, so there's no reason to be worried about messing this up.

    Why are my AirPods pro blinking orange?

    Amber: your AirPods or AirPods Pro are not fully charged. ... Flashing amber: there is a problem with your AirPods or AirPods Pro. You need to factory reset them and then re-pair them to your device. The best solution for anybody experiencing connectivity issues with their AirPods or AirPods Pro is to factory reset them.

    How do I reset my AirPods on my Mac?

    Press and hold the button on the back of your AirPods case until the light flashes white....Pair AirPods to a Mac after factory resetting
  • From your Mac menu bar, select the Apple logo in the top left corner.
  • Select “System Preferences”
  • Select “Bluetooth”
  • Next to your AirPods, click the “x” button that appears.
  • How long does AirPods pro last?

    Your AirPods Pro should last for this long on a single charge: up to 5 hours of listening time (active noise cancelling (ANC) off) up to 4.5 hours of listening time (ANC on) up to 3.5 hours of talk time (ANC on)

    Why are my AirPods flashing green and white?

    If your AirPods are in your case, then the light shows the charge status of your AirPods. If not, the light shows the status of your case. Green means charged, and amber means less than one full charge remains. If the light flashes white, your AirPods are ready to set up with one of your devices.

    What does the white button on AirPods do?

    The button on the back of AirPods allows for you to reset your AirPods and to pair with devices such as non-Apple products like a Windows computer with Bluetooth capabilities.

    How do I know if my AirPod battery is healthy?

    To see the battery on your AirPods, open your AirPods charging case next to its companion iPhone. The battery life percentage of the AirPods and the charging case will pop up at the bottom of the screen. You can also enable a battery widget on your iPhone to quickly view the battery life.