Whatever the case may be, how do I reconnect my Sonos move?
Open the Sonos app for iOS or Android. From the Settings tab, tap System > Add Product. Follow the steps in the app to connect Move to your Sonos system.
Despite that, can not connect to Sonos move? Press and hold the power button for at least 5 seconds to power it off. Press and hold the Join button and place Move back on the charging base. Continue holding the Join button until the light on top flashes orange and white. Let go the button.
Even so, how do I connect my Sonos speaker to my phone?
Sonos S1 app for iOS or Android
Connect your device to the WiFi network that Sonos is on.
Open the Sonos app.
When you see the message “Sonos found” at the top of the screen, tap Connect.
Tap Let's connect. ...
Once you see “Connected to your Sonos system,” select Done.
Does Sonos move have Bluetooth?
The Sonos Move is the first Sonos speaker that you can use outside of the Wi-Fi network that it's paired with. ... Because this Sonos speaker features Bluetooth. This is the first Sonos speaker to feature two different modes. You can use it on Wi-Fi like any other Sonos speaker or you can turn on Bluetooth.
Your Sonos product may have disappeared from your Rooms list if it has lost power. Make sure the product's power cord is plugged in firmly and connected to a working power outlet. You can check if a Sonos product is powered on and responding by pressing the Play/Pause button and seeing if the status light reacts.
There's the familiar “join” button, an all-new power button (to turn the speaker on/off), and button that toggles between Bluetooth and Wi-Fi. You'll know which mode the speaker is in by the color of its LED light located on top of the Move; white is Wi-Fi and blue is Bluetooth.
Flashing green The Sonos product is powered on and ready to be set up. It has not yet been configured or connected to a Sonos system. If your Sonos product is not brand new, a flashing green light means that the product was reset and is ready to be set up.
Open the Sonos app for iOS and Android. From the Settings tab, tap System. Under Products, tap one of the speakers you'd like to use in your stereo pair. Tap Set Up Stereo Pair (or Create Stereo Pair if using the Sonos S1 Controller) and follow the in-app instructions.
Click Sonos within the menu bar, then click About My Sonos System.
The About My Sonos System screen will display all of the Sonos products currently connected in your household, and whether they are connected to your home's WiFi (wireless setup) or the dedicated Sonos network (wired setup).
Sonos uses your wireless network to allow all of its speakers to communicate with one another and your controller. First, you need to connect a single Sonos speaker to the same Wi-Fi network as your smartphone or computer.
Find the Bluetooth button located on the back of your Move between the Power and Join button. Press the button once to switch to Bluetooth Mode. Move will chime and the LED on top of the speaker will turn blue.
When you see the message “Unable to connect to Sonos,” tap Let's fix it to get started. You can also go to the Settings tab and tap one of the prompts that appear: “Unable to find your Sonos system” or “Update your network settings.” Follow the instructions to connect Sonos to your new router or Wi-Fi network.
Do all Sonos speakers require WiFi? Almost all Sonos speakers need to be connected to a WiFi network or directly to the network with an ethernet cable in order to stream audio. The Sonos Roam and Sonos Move are the only Sonos speakers with Bluetooth built-in, so you can stream music without WiFi.
Join button Press the round Join button on the back of the unit to connect. Ethernet port You can use an Ethernet cable (supplied) to connect the Sonos One to a router, computer, or additional network device such as a network- attached storage (NAS) device.
Plug your SUB into the router, pair it up and then head to Settings > Advanced Settings > Wireless Setup. Follow the instructions on screen and once you're finished, unplug the SUB and place it in the desired location. That should work. Give it about 5 minutes and try again.
To mute/unmute this Sonos component: Press the Mute button to mute or unmute. To mute/unmute all Sonos components: Press and hold the Mutebutton for 3 seconds to mute all Sonos components in your household. Press and hold for 3 seconds to unmute all.
Your Sonos system was not found Check that your WiFi is enabled and connected. Make sure you're within range of your router. Confirm that you're connected to the right WiFi network. After confirming that your controller is connected to your home WiFi network, open the Sonos app.
Mostly for Geeks: Example of Noise from SonosNet In the second picture, Sonos is in use on channel 6. Sonos is using its own wireless standard and is being observed as interference to common wireless devices.
iPhone/iPad controller not connecting Your Sonos controller may not be connected to the correct WiFi network. Go to Settings -> WiFi on your device to confirm it is connected to your home WiFi network. 2. The iOS device running the Sonos controller may need to re-connect to your WiFi network.
If you're able to store your music on a Mac, PC, or a network-attached storage (NAS) drive, you can share it to Sonos using the Sonos app for macOS or Windows. Once your music library is set up you can browse and play that music from the Sonos app on your iOS device.